Electronic Pages  Die Homepage der Familie Beis

Parts List and Parts Availabiltity for AD2496

Currently I am short of a couple of components. Please ask.

The AD2496 will be discontinued and replaced by its successor AD24192, refer also to:

Return to "24 Bit / 96 kHz Audio Analogue to Digital Converter AD2496"

This is the parts list for the AD2496. All but the mechanical parts (enclosure and so on) are listed. There are a few options when the board is assembled. They are mentioned here.

I keep trying to provide all of the necessary components, particularly those ones which, from experience, are not easy to buy anywhere else. See below.

Parts List

Qty Value Manufacturer Type Specification Remarks Price (€) Availability
Integrated Circuits
1 CS5361 Cirrus Logic CS5361-KS 9.- Yes
1 CS8406 Cirrus Logic CS8406-CS 4.- -
1 MK2703 ICS MK2703S 3.- Yes
4 OPA2134 Burr-Brown OPA2134PA 3.- Yes
1 74HC132 Several 0.25 Yes
1 LT1054 Linear Technologies LT1054-CN8 5.- Yes
1 78M05 Several TO220 0.50 Yes
1 78L05 Several TO92 0.25 Yes
Optoelectronics
1 TLHR4400 Several LED 3 mm, red Yes
1 TLHG4400 Several LED 3 mm, green Yes
1 TOTX179P Toshiba TOTX179P 3.- -
Discrete
1 BC369-25 Several 0.20 Yes
1 BC368-25 Several 0.20 Yes
1 1N5817 Several 0.25 Yes
1 1N4148 Several 0.10 Yes
Passive
2 10p Several Lead spacing 2.5 mm 0.15 Yes
8 1n Epcos B37979G5102J NP0, 5%, Lead spacing 5 mm 0.30 Yes
2 3n3 Epcos B37986G5332J NP0, 5%, Lead spacing 5 mm 0.45 Yes
20 100n Several Lead spacing 2.5 mm Yes
5 10µ/35 Panasonic (Several) ECEA1VKA100 Diameter 5 mm, Lead spacing 2 mm 0.25 Yes

10

 100µ/16 Panasonic (Several) ECEA1CKA101 Diameter 5 mm, Lead spacing 2 mm 0.25 Yes
1 1000µ/16 Panasonic (Several) ECA1CM102 Diameter 10 mm, Height 16 mm, Lead spacing 5 mm 0.50 Yes
1 PE-65612 Pulse Engineering PE-65612 A 2nd transformer is intended for an optional AES3 output 3.- Yes
0 2x60µ Würth Elektronik 74279452 Common mode choke 2 x 60 µH 2 pcs. intended for increased EMC requirements, jumpers otherwise Probable
1 100µ Epcos, Fastron MCC (Epcos), MICC (Fastron) 100 µH, Diameter 3,5 mm, Length 7 mm 0.20 Yes
1 27MHz Several Case HC-49 short (HC-49/4H) 2.- Yes
6 100k Several 1%, Case 0207, Metal film Yes
0 430R Several 1%, Case 0207, Metal film 2 pcs. intended for a gain switch Yes
4 10k Several 1%, Case 0207, Metal film Yes
6 1k Several 1%, Case 0207, Metal film Yes
4 2k2 Several 1%, Case 0207, Metal film Yes
4 2k4 Several 1%, Case 0207, Metal film Yes
4 1k2 Several 1%, Case 0207, Metal film Yes
4 100R Several 1%, Case 0207, Metal film Yes
4 1k1 Several 1%, Case 0207, Metal film Yes
0 56R Several 1%, Case 0207, Metal film 2 pcs. intended for an AES3 output Yes
1 360R Several 1%, Case 0207, Metal film Yes
1 91R Several 1%, Case 0207, Metal film Yes
2 470R Several 1%, Case 0207, Metal film Yes
2 33R Several 1%, Case 0207, Metal film Yes
2 4x10k Several Resistor network, SIL, 5 pins 0.20 Yes
Electromechanical
1 PCB/AD2496 25.- Yes
1 SW-DIL16 Several 4 switches, sideways, DIL 7.62 mm "Piano"-type 4 switches for basic settings, 7 (8) for experimental use 1.50 Yes
1 Cinch Lumberg (Jalco) WBTOR 1 White 1.- Yes
1 Cinch Lumberg (Jalco) WBTOR 1 Red 1.- Yes
1 Cinch Lumberg (Jalco) WBTOR 1 Yellow 1.- Yes
1 ST-KLEINSPG Lumberg 5202580 6.3/1.9 mm (DIN 45323) 2.- Yes
0 STOCKO-04 Stocko, Lumberg or simple 1/10" headers 2 pcs. intended for a balanced XLR or off-board cinch inputs, jumpers otherwise 0.60 Yes
0 STOCKO-02 Stocko, Lumberg or simple 1/10" headers 1 intended for an off-board coax S/PDIF output, 2 for a gain switch 0.50 Yes
0 STOCKO-03 Stocko, Lumberg or simple 1/10" headers 1 pcs. intended for an AES3 output 0.45 Yes

Ordering Boards and Parts

Currently I am short of a couple of components. The table above is not necessarily correct. Please ask.

You can either order:

I experienced the following 6 parts indicated in pink to be necessary but most difficult to buy for DIYs:

One board only: 25.- €   Each additional board: 20.- €
Set of one board and 6 difficult to buy parts: 47.- €   Each additional set of one board and 6 difficult to buy parts: 41.- €
Complete kit with all components as indicated in the table above: 85.- €   Each additional complete kit with all components: 75.- €

Note: The complete kit does not contain enclosure, front and rear panel.

Availability: If "Probable" only: Likely to be available. When you order, please let me know, what to do in case one or more of these components are not available.

Shipping cost:, all inclusive

Letter, not insured, shipping on your risk:

Registered mail, insured:

Insured parcel outside Germany: Between 20.- (most of Europe) and 40.- € (far, far away), and I believe that usually won't be worth it. But I can do it.

Widerrufsrecht: Der Käufer hat ein Widerrufsrecht mit einer Frist von zwei Wochen beginnend mit dem Empfang der Ware. Der Widerruf muss keine Begründung enthalten und ist in Textform oder durch Rücksendung der Ware innerhalb von zwei Wochen zu erklären. Zur Fristwahrung genügt die rechtzeitige Absendung and die Impressum genannte Adresse. Der Käufer trägt die Versandkosten für die Rücksendung.

Buyers outside the EC will have to pay tax.

You will get an invoice, but without tax. This means: You cannot get tax refund, neither within nor outside Europe!

In case you want to place an order:

Last update: Feburary, 15th, 2007 Questions? Suggestions? Email Me! Uwe Beis